Krystol Leak Repair System - Repairing Existing Leaking Concrete
Crystalline Repair Materials for Concrete
The Krystol Leak Repair System is a permanent crystalline waterproofing solution used for repairing leaking cracks, holes and joints found in concrete. It reliably stops high water flow, even under high-hydrostatic pressure, and outperforms injection systems. Repairing leaks is a simple 3-step process that involves preparing a chase by chiselling into the concrete, stopping flowing water with Krystol Plug (if required), and then filling the chase flush to the surface with Krystol Repair Grout.
After completing the leak repair, Krystol T1 Concrete Waterproofing will protect the entire structure against the continued ingress of water and further concrete deterioration, as well as reduce the likelihood of further leaks developing in the structure.
Features & Benefits
Permanently repaired for the life of the concrete
Simple and easy application process
Negates the risk of costly call-backs
Can repair from the positive or negative side
How it Works
The Krystol Leak Repair System contains Krystol technology. When applied to concrete, Krystol chemically reacts with water and un-hydrated cement particles to form insoluble needle-shaped crystals that fill capillary pores and micro-cracks in the concrete and block the pathways for water and waterborne contaminants. Any moisture introduced over the lifespan of the concrete will initiate crystallization, ensuring permanent waterproofing protection.
Application Areas
The leak repair system comprised of Krystol Plug, Krystol Repair Grout, and Krystol T1 is primarily used to repair leaking cracks in concrete. The system, as well as components therein can also be used to:
Repair Leaking cracks or construction joints
Seal around pipes and metal fixtures in masonry concrete
Repair spalled or honeycombed concrete
Use as a waterproof parge coat on masonry walls
Plug and seal construction form tie holes
Effective Leaking Concrete Repairs
The primary component of the Krystol Leak Repair System is Krystol Repair Grout. Krystol Repair Grout is a crystalline concrete waterproofing product that stops the flow of water to permanently repair leaking cracks, holes and joints in concrete, and can also be used to resurface and waterproof defective, damaged or deteriorating concrete. The grout employs advanced fibre technology and shrinkage controlling additives to prevent cracking.
Krystol Repair Grout is simple and easy to use and provides a means of repairing cracks, holes, joints, etc with a crystalline material that, when used with Krystol T1, will create a permanent waterproofing repair.
For concrete repair with flowing water, Krystol Plug is first used. As part of the Krystol Leak Repair System, Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete.
Krystol Plug sets hard within 2 minutes and has high-compressive strength, which allows it to stop water even under high hydrostatic pressure. Stopping water flow then allows permanent repair of the leak using Krystol Repair Grout and Krystol T1.
Use of this website is subject to the conditions and details listed below under the drop down menus - Disclaimer and Privacy.
Disclaimer
The information contained in this website is for general information purposes only. The information is provided by Stratmore Construction Solutions Limited and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.
Every effort is made to keep the website up and running smoothly. However, Stratmore Construction Solutions Limited takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.
Privacy
We take your rights, along with the privacy and confidentiality of your data, seriously. In accordance with the Privacy Act 2020 the information that you provide is the least amount of information that we require for engaging with you and allow us to provide you with the information requested from us. For any questions about the collection and use of your personal data, please contact info@stratmore.co.nz
Contact us
Stratmore Construction Solutions Ltd
Phone
Wellington: 04 567 8436
or North Island: Craig (027) 442 2942
Nelson: 03 546 5644
Jos Willems (Branch Manager)
or South Island: Rob (027) 235 7447
Email: krystol@stratmore.co.nz
Physical
Head Office (Wellington)
185 Rata Street, Naenae
Lower Hutt 5011
Nelson Branch
11b Pascoe Street
Nelson 7011